Upvc Door Lock Replacements
You may need to change your upvc lock for a variety of reasons. It could be because you've lost your key or the barrel has been damaged.
It is important to get your upvc locks replaced by an expert. This will ensure that the work is done to the highest standards and provide you with the security you require.
Lock Cylinder
The lock cylinder is the area of the lock that can be opened using keys. The retaining screw separates it from the body of the lock that houses the locking mechanisms. Standard cylinders have a pin tumbler mechanism that is pressed by the key on one side and the locking cam on the other. This triggers the bolt mechanism. The cylinder is replaceable with an alternative one to alter the lock's key-operation, design or security level.
The most popular type of cylinder used on uPVC doors is the Euro profile cylinder, but there are British standard and anti-snap versions available. The higher security cylinders have more sophisticated pin tumblers and other components that help stop burglary techniques such as snap guns and lock bumping.
To replace the cylinder you'll need to take off the door handle first, and then unscrew the retaining screw that holds the cylinder in place from inside the door. Once this is done then you can remove the old cylinder and insert the new one. It might be more difficult to replace older uPVC locks that are more than 20 years old. However, the newer locks are constructed with stronger materials and are simpler to install using the proper tools.
It is important to purchase the correct sized of cylinder that will fit in your door. In the event that it is not, it will be difficult to install. The dimensions are measured from the central circular portion of the keyhole all the way to the center of the square spindle. This measurement is referred to as the PZ dimension.
You can check whether the cylinder you have is of the correct size by putting it inside the door lock and turning the key. If you have trouble turning the key, it's probably time to replace it.
Many people choose to replace the cylinder lock on their uPVC door after an incident of theft or another incident that damaged the lock. Some individuals may want to increase the security of their company or home. In some instances it could be an obligation under the law to upgrade your locks.
Lock Handle
Changing the lock barrel on a door made of upvc is among the easiest tasks that a locksmith could complete. It can be completed in a matter of minutes and there are many reasons for wanting to change the locks; your tenants may have moved out and not returned the keys or you may have lost the key, or if the barrel is damaged, then you'll require a new one.
You will need to remove the handle and cylinder from the door in order to gain access to the screw hole in the back plate. It is easy to do this using a screwdriver, but you should be cautious not to damage the handle or cylinder. Once you have removed the cylinder and handle you will be required to measure the lock mechanism made of plastic to be able to purchase the cylinder. The PZ and Backset are the two most crucial measurements.
It is recommended to match a new cylinder with the manufacturer of the locking mechanism made of upvc. The easiest method to do this is to look at the faceplate made of metal of the lock. If there is a name written on it, then that would be your brand. The shape of the gearbox is a different method to identify the brand.
There are a variety of kinds of Upvc locks, including euro cylinder and anti-snap cylinder locks. They can be very similar, but there are some differences that make them superior or less secure. The anti-snap euro cylinder lock is much more difficult to open than standard euro cylinder locks.
You can buy the upvc lock parts and make it yourself as long as you know how to use a screwdriver however, it is generally recommended to leave this type of job to professionals. They will be able to provide you with the proper parts and complete the task quickly and to a high standard. A professional can repair any damage that could have been caused during the procedure.
Fixing Plates
One of the most frequent problems with doors made of Upvc is that the latch fails to reach the strike plate. This could cause the door to be stuck or not close. This is often caused by the strike plate not being properly fit to the frame. To fix this you can move the strikeplate either up or down until the frame is aligned correctly. In addition tightening the hinges could aid. However, it is important not to tighten them too much, since this can cause damage to the screws.
Finding replacement handles for your upvc doors is not as difficult as you might think. You can find many different types of handles online. You should choose a handle that matches the keyhole and cylinder of your upvc doors. To ensure this, you should take a measurement of the distance between keyhole and the center of the cylinder and the spindle of the handle. Additionally, you should verify that the spring cassette is compatible with your new handle.
Installing a new locking system is a different option to upgrade your upvc door. There are a variety of options that range from locks made for domestic use to locks designed for commercial applications. upvc window lock replacement of the locks are designed to withstand corrosive conditions and come with various features.
Fab and Fix offers a large selection of replacement handles for Upvc doors and locks. They have a wide selection of handles in various styles and colors. All are made with high-quality materials. They are also tested to meet various security standards. They are simple to set up. In addition, they are affordable and provide great value for money.
Gearbox
When a uPVC door lock fails, the problem is usually limited to the gearbox, rather than the entire multipoint mechanism. This means that replacing the gearbox could be an easier task than replacing the handle or barrel, and is something that anyone with a decent DIY skills can do without too much difficulty.
The most important thing to do when replacing a uPVC gearbox is to use the correct tools and follow the correct procedure. If you have a screwdriver that is suitable and a tape measure, the process is relatively simple and can be completed in less than an hour. Before starting, however, it is worth ensuring that you have the correct type of gear box for the door you are using, and this will generally be stated in the description of the product.
Always ensure that you are using a British Kite marked lock for your uPVC door, as they come with the most up to date security features which protect against a variety of ways such as the latest phenomenon referred to as "lock snapping". This means that the UK government will test and confirm the lock as high-security.
It is crucial to prop the door open or fix it in a way that it does not close during the procedure. The first step is to loosen the long screw that holds the handle in the position. Make sure to keep this screw in a secure place since you'll require it to reattach the handle later.
After you have removed the screw, you can remove the handle and view the inner workings for the first time. Once the old cylinder is been removed, you will need to carefully slot in the new cylinder, making sure that it is in line with the lock barrel. After you are satisfied that everything is in place you can screw the long screw back in and then screw the handle to its original position.
A common cause for a uPVC door handle not lifting to lock is an absence of lubrication but in some cases the issue could be due to a full mechanism failure. If you suspect this, you should call in a locksmith.